Westox Building Products
Westox Building Products consist of systems for renovation, restorations and conservation of heritage and modern buildings. Westox are leaders in the field of desalination and salt contamination rectification and have contributed to the restoration of a number of famous heritage buildings around the world.
Westox products are of superior quality, are 100% Australian owned and manufactured and are currently being sold in over 46 countries globally. Westox provides building solutions for the future. We can provide a range of unique products in support of a large range of building solutions including architectural coatings, restoration, waterproofing and plastering.
Products we stock
CR25
Product Description
A latex based emulsion used as a tanking membrane for internal and external walls and to provide a sealed surface on concrete substrates under sheet membrane.
Coverage and Use
- Mixing ratio one part CR25 to two parts with cement by volume.
- 5Lt CR25 and 10 Litre cement – 12.5m2 @ 1mm thick.
- Available in 5Lt & 20Lt.
Only to be used as a guide and cover rates are approximate.
Creteseal
Product Description
Water based acrylic concrete dust proofer and hardener. Used in carparks and warehouses.
Coverage and Use
- 10m2 per Litre per coat.
- Two coats required.
- Drying time 4 hours per coat.
- Available 10Lt & 20Lt.
Only to be used as a guide and cover rates are approximate.
D-LAM 100
Product Description
Is a solvent based gel formulated for the removal of paint. Used on timber, plaster and masonry.
Coverage and Use
- 1m2 per Litre.
- Apply by brush or roller.
- Available in 4Lt & 20Lt.
Only to be used as a guide and cover rates are approximate.
D-LAM 20
Product Description
Is a solvent based paint removal system in an easy to use paper pulp carrier. Used to remove paint from timber, plaster and masonry.
Coverage and Use
- Apply by trowel at approximately 3 – 5mm thickness.
- Time – 20 minutes for one coat and 24 hours for up to six coats.
- Available in 4Lt & 20Lt.
Only to be used as a guide and cover rates are approximate.
High Block C
Product Description
A highly adhesive solvent based penetrating primer that locks into the substrate providing a mechanically stable surface. Used on masonry, fibre cement sheets, cementitious surfaces and over existing sound paint.
Coverage and Use
- 8 – 10m2 per Litre.
- Touch dry in 20 minutes @ 20ºc.
- Available in 4Lt & 20Lt.
Only to be used as a guide and cover rates are approximate.
Water Repellent
Product Description
A clear impregnating water repellent that penetrates and chemically reacts with the cementitious surface preventing spalling and rebar corrosion by locking out water and harmful waterborne contaminants such as CO2.
Coverage and Use
- Brick 2 – 5m2 per Litre by flood coating, depending on substrate.
- Concrete 5m2 per Litre by flood coating, depending on substrate.
- Two coats, wet on wet.
- Available in 5Lt & 20Lt.
Only to be used as a guide and cover rates are approximate.
Incellcoat
Product Description
Water based, high build, flexible, insulative coating used for temperature control surfaces. Used on factory roofs, farm buildings, mobile homes, silos, shopping centres and hospital roofs.
Coverage and Use
- 1m2 per Litre.
- Spray or roller applied.
- Minimum 12 hours drying time.
- Available in 15Lt.
Only to be used as a guide and cover rates are approximate.
WB36 Epoxy
Product Description
Two part coloured water based epoxy. Used on trafficable areas.
Coverage and Use
- Colours Grey.
- Primer 5 – 6m2 per Litre per coat.
- Two coat required.
- Drying time 4 hours @ 25 ºc.
- Available in 20Lt Kit (2 x 10Lt).
Only to be used as a guide and cover rates are approximate.
WB30 Epoxy
Product Description
Two part coloured water based epoxy. Used on basements, concrete and cement render priming lift wells, retaining walls, water tanks (potable).
Coverage and Use
- Colours White or Grey.
- Primer 5m2 per Litre per coat.
- One coat required.
- Vapour Barrier 3m2 per Litre 1st coat.
- 5m2 per Litre 2nd coat.
- Drying time 4 hours @ 25 ºc.
- Available in 4Lt Kit (2 x 2Lt) & 20Lt Kit (2 x 10Lt).
Only to be used as a guide and cover rates are approximate.
WB25 Epoxy
Product Description
Two part clear water based epoxy. Used as a primer, binder, sealer and in concrete repair mortars.
Coverage and Use
- Clear (refer to WB30 for colours)
- Sealer 8m2 per Litre.
- Two coats required.
- Concrete Repair one part cement, three parts sand to one part WB25 by volume.
- Available in 4Lt Kit (2x 2Lt) & 20Lt Kit (2 x 10Lt).
Only to be used as a guide and cover rates are approximate.
Stainshield
Product Description
Formulated to impregnate porous materials or provide water and stain repellency. Used on concrete, brick, stone and porous materials.
Coverage and Use
- Brick 10 – 12m2 per Litre per coat
- Concrete 10m2 per Litre per coat.
- Two coats required.
- Available in 5Lt, 10Lt & 20Lt
Only to be used as a guide and cover rates are approximate.
Lime Putty
Product Description
The base of most traditional mortars and plaster mixes.
Coverage and Use
- Putty Lime (sieved 20mm mesh) – used for Render finish & Plaster set finish.
- Available in 20Lt & 200Lt.
- Made from traditional methods.
- Aged for 14 days prior to sale.
Only to be used as a guide and cover rates are approximate.
Run Lime
Product Description
Westox Run Lime is slaked 14 days prior to sale.
Coverage and Use
- Fine Lime used for cornice work and lime washes.
- Available in 20Lt & 200Lt.
- Shelf Life 3 years if not dried out.
Only to be used as a guide and cover rates are approximate.
Slaked Lime
Product Description
Westox Slaked Lime is slaked 14 days prior to sale.
Coverage and Use
- Coarse Lime used for brick or stone laying, rendering & repointing
- Can be mixed to make a mortar.
- Available in 20Lt & 200Lt.
- Shelf Life 3 years if not dried out.
Only to be used as a guide and cover rates are approximate.
Lime Wash
Product Description
Based on slaked rock lime using a number of traditional formulations.
Coverage and Use
- 5-8m2 per Litre per coat.
- Three coats required.
- 2 days between coats.
- Available in 20Lt.
- Applied using a block brush in a crisscross action.
Only to be used as a guide and cover rates are approximate.
